No. 01The Vik lounge chair
Made to be inherited.
Solid oak, ash and walnut, joined by hand in one Stockholm workshop. No screws where a joint will do. Every piece signed by the person who made it.
Timber
- Price
- 38 400 SEK
- Made to order
- 8–10 weeks
- Note
- Ages from straw to honey within a year.
- 1987One workshop on Södermalm, the same since the first chair.
- 14Joiners. Each piece is made start to finish by one of them.
- 0Screws in any seat, frame or bed we have ever made.
- For lifeRepairs, refinishing and new cushions, for as long as it stands.
§ 1The joint
Held by wood, not by metal.
Every leg of the Vik meets its rail in a mortise and tenon, pulled tight by an oak peg. The joint is older than the chair. It will outlast it, too.
- Mortise, 30 × 8 mmChopped into the leg by chisel, 20 mm deep.
- Tenon, shouldered on four sidesSawn a hair proud, then pared to a push fit.
- Oak peg, Ø 8 mm, drawboredHoles offset by 1.5 mm, so the peg pulls the shoulder shut.
§ 2The collection
Six pieces. Added to slowly.
One new design every two or three years, when it is ready. Prices are for oak and include delivery within Sweden.
Vik
from 38 400 SEKLounge chair, linen or wool cushions
W 760 · D 820 · H 980 · SH 400 mm
Långa
from 64 900 SEKDining table, seats six to ten
L 2400 · W 960 · H 735 mm
Bro
from 21 500 SEKBench, for a hall or a table's long side
L 1600 · D 340 · H 450 mm
Stege
from 29 800 SEKOpen shelf, wall-fixed or free-standing
W 900 · D 320 · H 1960 mm
Natt
from 58 200 SEKBed frame, slatted, 140 to 180 wide
W 1600 · L 2080 · H 920 mm
Tre
from 7 900 SEKThree-legged stool, turned seat
Ø 360 · H 460 mm
§ 3Timber
Three woods. All from near here.
Every tree grew within 400 km of the workshop. We do not stain. What you see is the wood.
Oak
Quercus robur- Grown
- Småland, 180 km south
- Air-dried
- Two winters, then kilned
- Hardness
- Janka 1 360 lbf
- Character
- Medullary flecks, quiet figure
Ash
Fraxinus excelsior- Grown
- Uppland, 90 km north
- Air-dried
- One winter, then kilned
- Hardness
- Janka 1 320 lbf
- Character
- Long straight grain, gives a little
Walnut
Juglans regia- Grown
- Fallen orchard trees, Skåne
- Air-dried
- Three winters, slowly
- Hardness
- Janka 1 010 lbf
- Character
- Swirls near the root, never matched
§ 4Workshop
Five steps. None of them hurried.
Fourteen joiners on Ekbacksgatan, each making a piece from first board to final signature. It takes as long as it takes. Usually about three years, counting the drying.
We do not use screws where a joint will do. Screws loosen. Joints settle.
Selection
We buy whole logs, not boards, and saw them through and through. The boards are stacked in order with stickers between them, so a table top can come from one tree.
2–3 yearsMilling
Boards rest in the workshop for a month before they are planed, then rest again. Wood moves. We let it move before we ask it to hold still.
6 weeksJoinery
Mortise and tenon, bridle, dovetail. Cut by hand where the eye will rest, by machine where it will not. Joints are pegged and glued with hide glue so they can be opened again.
3–5 weeksFinishing
Scraped, not sanded, on every visible face. Three coats of hard-wax oil, each rubbed out by hand. No lacquer. A scratch can be mended at a kitchen table.
1 weekSigning
The joiner who made it signs and numbers the underside, with the tree it came from. We keep the record. Bring it back in forty years and we will know it.
1 day
§ 5Owners
Letters we keep.
We bought the Långa table when our first child was born. She is twenty-two now and has asked, more than once, who gets it.
The chair arrived with a small card naming the tree and the joiner. Somehow that changed how carefully we sit in it.
Our dog chewed one leg of a Bro bench. They replaced the leg from the same board, and you cannot find the seam.
§ 7Showroom
Sit in it first.
The showroom is upstairs from the workshop. Book an hour and one of us will be there, with coffee and the timber samples.
- Address
- Ekbacksgatan 12
118 46 Stockholm - Hours
- Tue–Fri 11–18 · Sat 11–16
Thu evenings by appointment
§ 8Questions
Asked often.
How long does a piece take?
Between six and fourteen weeks, depending on the timber and the queue. We give you a week number when you order, and we keep to it. If a board fails at the bench we tell you the same day.
Do you deliver outside Sweden?
Yes, across the Nordics and the EU. Within Sweden two of us bring it and set it in place. Elsewhere it travels crated with a specialist carrier; a chair costs around 2 400 SEK to send, a table around 6 800 SEK.
Can I change the dimensions?
Within reason. Tables and beds are made to the centimetre at no extra cost. Chairs are fixed, because their proportions are the design. Larger commissions start with a conversation in the showroom.
What does 'repaired for life' mean in practice?
Bring it back, or send a photograph. Loose joints, deep scratches, water rings, a broken slat: we mend them at cost of materials. Refinishing a dining table costs a flat 3 500 SEK.
Is the timber certified?
We buy from a small number of foresters and estate owners we know by name, within 400 km of the workshop. Each piece's record notes where its tree stood. Ask, and we will show you the paperwork.
Can I visit the workshop itself?
On the first Saturday of each month, from 10 to 12, the workshop doors are open. Wear shoes you do not mind getting dusty.