01CNC job shop · Gabrovo · since 1994
Parts that measure exactly what the drawing says.
We mill, turn, grind and spark-erode metal and plastic parts for machine builders across Europe. One prototype or five thousand pieces, held to ±0.005 mm and shipped with the measurement report.
Unit price and lead time on screen. No sign-up, no sales call.
- the tightest tolerance we hold
- ±0.005 mm
- CNC machines on two shifts
- 23
- drawing to dispatch, express
- 48 h
- of batches pass first inspection
- 99.2%
- parts shipped last year
- 412,000
Who we machine for
- Hydraulics
- Food machinery
- Medical devices
- Motorsport
- Factory automation
- Rail
- Optics
02What we machine
Six processes under one roof, so your part never leaves the building half-made.
Most parts need two or three of these. Doing them in one shop means one quote, one schedule and one person who answers for the result.
5-axis milling
Up to 650 × 520 × 475 mm · ±0.005 mm
Housings, impellers and brackets machined in one clamping, so features on five faces stay true to each other.
CNC turning
⌀2–320 mm · bar-fed to ⌀65 mm
Shafts, bushes and pins from bar or billet, with live tooling for flats, cross holes and threads.
Mill-turn
Y-axis and sub-spindle · lights-out nights
Complex turned parts finished complete, both ends, without a second operation.
Wire EDM
Wire ⌀0.25 mm · ±0.003 mm · to 62 HRC
Sharp internal corners, punches and dies, and slots in hardened steel no cutter can reach.
Grinding
Cylindrical and surface · Ra 0.2
Bearing seats and sealing faces ground to size after hardening, measured warm and cold.
Finishing and kitting
Anodising · passivation · laser marking
Parts come back finished, marked with your part number, bagged and labelled for the line.
03Instant quote
Draw it here. See what it costs.
Pick a part family, set the size, material, tolerance, finish and quantity. The drawing redraws itself and the price follows. For anything with more features, send your STEP file and an engineer replies within four working hours.
- Order total
- €996.50
- Lead time
- 8 working days
Excl. 20% VAT, delivered in the EU
Where the money goes
- Material€2.69
- Machining€11.26
- Programming and setup€1.87
- Finish€4.12
Stock 0.377 kg · cycle 14.7 min per part
04Materials
Eight stock materials, in the rack, certified.
Every bar arrives with an EN 10204 3.1 certificate and keeps its heat number on a label all the way to your part. Other grades on request, usually within a week.
| Material | Grade | Density | Hardness | Cycle time | Typical use |
|---|---|---|---|---|---|
| Aluminium 6082 | EN AW-6082-T6 | 2.70 g/cm³ | 95 HB | ×1.0 | Brackets, fixtures, housings |
| Aluminium 7075 | EN AW-7075-T651 | 2.81 g/cm³ | 150 HB | ×1.1 | Light, highly loaded parts |
| Stainless 304 | 1.4301 | 7.90 g/cm³ | 190 HB | ×2.1 | Food machinery, covers |
| Stainless 316L | 1.4404 | 7.95 g/cm³ | 200 HB | ×2.3 | Medical, marine, chemicals |
| Carbon steel C45 | C45E · 1.1191 | 7.85 g/cm³ | 210 HB | ×1.6 | Shafts, gears, wear parts |
| Free-cutting brass | CW614N | 8.47 g/cm³ | 110 HB | ×0.8 | Fittings, valves, inserts |
| Acetal (POM-C) | POM-C | 1.41 g/cm³ | n/a | ×0.7 | Guides, rollers, insulators |
| Titanium Grade 5 | Ti-6Al-4V · Gr 5 | 4.43 g/cm³ | 334 HB | ×3.4 | Implants, motorsport, aerospace |
Cycle time compared with aluminium 6082 for the same part. It is the biggest reason two identical parts cost different amounts.
05Process
Five revisions from file to crate.
We run every order through the same revision table you would find on a drawing: each step signed by the person responsible, nothing released until the last one is.
- Day 0
Drawing received
Upload a STEP and a PDF, or use the instant quote. Simple parts are priced on screen; the rest within four working hours.
- Day 0–1
Design-for-manufacture review
An engineer marks up your drawing in red: a radius that saves an operation, a tolerance you may not need. You decide.
- Day 1–3
Program and first article
CAM program, fixture, the first part measured on the CMM. You get the first-article report before the batch runs.
- Day 3+
Production
The batch runs with in-process checks on every tenth part, charted so a drift shows before it becomes scrap.
- Last day
Inspection and dispatch
Final inspection, report and material certificate in the box, parts packed in rust-preventing film. Courier across the EU in one to three days.
06Quality
Measured in a room kept at 20 °C, reported in full.
A part is only as good as the proof that comes with it. Every order ships with a dimensional report, and first articles are measured on every characteristic on the drawing.
First-article report KP-0417 (extract)
| Characteristic | Nominal | Tolerance | Measured | Result |
|---|---|---|---|---|
| Bearing seat ⌀24 h6 | 24.000 | ±0.013 | 24.006 | OK · In tolerance |
| Overall length | 62.500 | ±0.050 | 62.482 | OK · In tolerance |
| Position, 6 holes | — | 0.02 | 0.008 | OK · In tolerance |
| Perpendicularity to A | — | 0.02 | 0.011 | OK · In tolerance |
| Flatness, face A | — | 0.01 | 0.004 | OK · In tolerance |
| Roughness, bore (Ra, µm) | — | ≤ 0.8 | 0.52 | OK · In tolerance |
ISO 9001:2015
Certified quality management since 2008, audited every year.
EN 10204 3.1
Material certificates traced by heat number to every part.
PPAP level 3
Full production part approval for automotive and rail customers.
RoHS and REACH
Declarations on file for every material we stock.
07Shop floor
Twenty-three machines and a measuring room, two shifts a day.
One building on the south side of Gabrovo, laid out so a part flows from saw to machine to measuring room without crossing back on itself.
5-axis machining centres ×4
650 × 520 × 475 mm, 20,000 rpm
3-axis vertical mills ×7
Up to 1,020 × 560 mm table
CNC lathes ×6
⌀320 mm chuck, bar feeders to ⌀65
Mill-turn centres ×2
Y-axis, sub-spindle, unmanned at night
Wire EDM ×2
Workpieces to 400 kg, ±0.003 mm
Grinders ×2
Cylindrical ⌀250 × 600, surface 600 × 300
Measuring room, 20 ± 0.5 °C
The people who sign the drawing
Stoyan Kovach
Founder, still on the night shift some Fridays
Started with one manual lathe in a garage on the Yantra.
Since 1994
Mira Kovach
Operations and quotes
Answers your email before the kettle boils.
Since 2009
Ivo Denev
Quality engineer
Owns the measuring room and the red pen.
Since 2012
Raya Tsoneva
CAM programmer
Turns a STEP file into a cycle time.
Since 2017
08Customers
Machine builders who stopped looking for another shop.
We send drawings on Friday and have first articles with a full report on Wednesday. In four years I have not had to chase a single delivery.
Desislava MarinovaPurchasing lead · Arvelo Packaging
Their review found a tolerance we did not need on a bore. It took eighteen percent off the part and nothing off the machine.
Lukas BrennerHead of mechanical design · Medira Instruments
Titanium uprights, two days before a race weekend, inside the tolerance band. They picked up the phone at ten at night.
Elin SandqvistChief engineer · Halvard Motorsport
09FAQ
Questions engineers ask before the first order.
Which files do you need?
A STEP file for the geometry and a PDF drawing for tolerances, threads and finish. IGES and Parasolid also work. A drawing alone is fine for simple turned parts.
Is there a minimum order?
No. One prototype is welcome. Setup is a fixed cost, so the instant quote shows how the unit price falls as the quantity grows.
Will you sign our NDA?
Yes, before you send anything. Tick the box on the contact form and we return it signed the same day.
My tolerance is tighter than ±0.005 mm. Can you hold it?
Sometimes, by grinding or lapping and with a measuring plan agreed in advance. Send the drawing and we tell you honestly.
Do you ship outside the EU?
Yes, to the UK, Switzerland, Norway and Turkey every week, with customs paperwork prepared by us and duties shown on the quote.
Gabrovo is famous for its thrift jokes. True?
We prefer to call it material efficiency. Every quote nests your parts to waste as little bar as possible, and the saving is in your price.
10Contact
Send a drawing. Get an engineer, not a form letter.
Quotes, NDAs and visits to the shop: write to the people who will make the part.
- Address
- ul. Strugarska 3, Promishlena zona Yug
5300 Gabrovo - Phone
- +359 66 804 120
- quotes@kovach-precision.example
- Office
- Mon–Fri, 07:00–16:30
Machines run 06:00–22:00 - VAT no.
- BG 207 418 553