K-1 picking cell · Series 3
1,200 picks an hour. Zero drama.
The K-1 lifts items from tote to order at the pace of three pickers, slots in beside the conveyor you already own and goes live in eleven days. It does not need a cheering section.
Go on, take the controls. The arm forgives you after five seconds and goes back to work.
Shown at 50% speed. The real one is quicker than it looks.
Take control
Auto cycle
- Gripper X
- − 846 mm
- Gripper Y
- + 409 mm
- Tool angle
- −180.0°
- Picks per hour, sustained
- 1,200/h
- Pick accuracy across mixed SKUs
- 99.7%
- Grasp decision, camera to close
- 0.4s
- From delivery to first live order
- 11days
- Footprint, safety fence included
- 2.1m²
214 cells live in 9 countries.
61.4 M picks last quarter.
- BrandtnerLogistik
- oskarhaus
- FerroviaParts
- NORDQUAY
- Lumiogrocers
- Vellum & Co.
Chapter 01 · Fit
Three parts. One afternoon of bolting.
A K-1 cell is a conveyor adapter, a vision mast and a gripper on an arm. Each one is designed to meet your warehouse where it already is.
FIG. 1 · K-1 cell, exploded along the tool axis
Conveyor interface
The K-Link adapter clamps onto your existing roller or belt conveyor at any height between 640 and 920 mm. Totes are indexed by a photo-eye and a soft stop; no re-plumbing of the line, no new controls cabinet.
Fits 300–800 mm conveyors · 24 V I/O or Ethernet
Vision mast
A stereo pair and a structured-light projector read the tote from above while the arm is still moving. Kinemat Sight decides where and how to grasp before the previous item has landed, which is where the 0.4 seconds come from.
2 × 5 MP stereo · 940 nm projector · 30 fps
Adaptive gripper
Four compliant fingers around a vacuum core. Rigid boxes get fingers, polybags get suction, blister packs get both. Tool changes are never needed, and fingers swap out in ninety seconds with one hex key.
0.02–8 kg · 12–310 mm items · 18 N max finger force
Chapter 02 · Fleet
Software your shift lead will actually open.
Kinemat Fleet shows every cell, every pick and every pause in plain language. When something needs a human, it says which human and what to bring.
| Cell | State | Picks/h | Uptime 30d | Last event |
|---|---|---|---|---|
| K1-MUC-01 | Picking | 1,184 | 99.6% | — |
| K1-MUC-02 | Picking | 1,212 | 99.8% | — |
| K1-MUC-03 | Picking | 1,167 | 99.4% | Regrip ×2, 14:02 |
| K1-MUC-04 | Finger swap | — | 98.9% | Planned, 14:20 |
| K1-MUC-05 | Picking | 1,203 | 99.7% | — |
| K1-MUC-06 | Picking | 1,196 | 99.7% | — |
| K1-MUC-07 | Learning SKU | 742 | 99.5% | New item 4006-381 |
| K1-MUC-08 | Picking | 1,221 | 99.9% | — |
Picks this shift
52,318
+3.1% vs. plan
Fleet uptime, 14 days99.7%
Needs a human
K1-MUC-04 · finger set B is at 92% wear. Swap planned for 14:20, takes 90 seconds. Bring a 3 mm hex key.
Plain-language events
No error codes on the floor. Every stop comes with the cause, the fix and how long it will take.
Fleet learning
A tricky SKU solved in Porto is solved in Munich an hour later, on every cell you run.
Open data
Every pick is an event with an image, a grasp score and a timestamp. Export it, stream it, keep it.
Chapter 03 · Specs
The spec sheet, without the asterisks.
Measured on production cells, mixed-SKU, at our Munich test hall. Your numbers from the site survey replace ours before you sign anything.
| Axes | 3 articulated + 1 rotary base |
|---|---|
| Reach | 1,680 mm |
| Payload | 8.0 kg at full reach |
| Repeatability | ± 0.05 mm |
| Arm weight | 212 kg (cell: 412 kg) |
| Ingress protection | IP54 |
| Pick rate | up to 1,200 / h |
|---|---|
| Cycle time | 2.9 s pick-to-place, 600 mm move |
| Grasp decision | 0.40 s median |
| Pick accuracy | 99.7 % mixed SKU |
| Item range | 12–310 mm, 0.02–8 kg |
| Noise | < 62 dB(A) at 1 m |
| Supply | 400 V AC, 3-phase, 16 A |
|---|---|
| Average draw | 1.9 kW |
| Ambient | +5 to +40 °C, non-condensing |
| Footprint | 1.4 × 1.5 m incl. fence |
| Network | 1 GbE, optional private 5G |
| Interfaces | REST · MQTT · OPC UA · VDA 5050 |
| Joint | Range | Max speed | Reducer |
|---|---|---|---|
| J1 · Shoulder | ± 110° | 220 °/s | Harmonic, 101:1 |
| J2 · Elbow | ± 150° | 260 °/s | Harmonic, 81:1 |
| J3 · Wrist | ± 180° | 400 °/s | Cycloidal, 59:1 |
| J0 · Base | ± 270° | 180 °/s | Slewing ring |
Integrations
Talks to your stack. Politely.
Connectors for the systems that release orders, and open protocols for everything else. Integration is in the price, not a phase two.
Lagerline WMS
Native connectorOrder lines in, confirmations out. Setup in an afternoon.
Ostara ERP
Native connectorItem master sync with weights, dimensions and images.
Brightbin WES
Native connectorWave release and tote routing, cell by cell.
Corvid OMS
RESTPriority orders jump the queue at the next tote.
Paketmeister Shipping
RESTLabel printed as the last item lands.
Nordwerk MES
OPC UAKitting for light assembly, same cell.
Fernhalt AMR fleet
VDA 5050Mobile robots bring and fetch totes.
Your own stack Anything
MQTTDocumented topics, sample code, a human on Slack.
Chapter 04 · Safety
Fast when nobody is near. Patient when somebody is.
The K-1 shares a hall with people, forklifts and the occasional visiting board member. It was engineered to make that uneventful.
Speed and separation monitoring
Two safety-rated laser scanners map the cell. When a person enters the outer zone the arm slows; in the inner zone it stops, holding position, and resumes on its own when the zone clears.
Power and force limiting
Torque is sensed at every joint. Unexpected contact triggers a safety-rated stop within 12 ms, well under the thresholds set out for collaborative operation.
Independent assessment
The K-1 is designed and tested against the international standards for industrial robots and collaborative applications, and every cell ships with a site-specific risk assessment signed by an independent assessor.
Boring by design
Dual-channel e-stops at the cell and on the pendant, a physical fence on three sides, and a status light that is green or magenta. Nobody has to interpret a blinking pattern.
From the floor
“We put two cells in on a Tuesday and stopped talking about them by the following Thursday. That is the highest praise I have for any automation.”
Head of Operations, Brandtner Logistik, Augsburg
“The fleet console is the first robot software my shift leads open voluntarily. It tells them what is wrong in one sentence and what to do in another.”
Site Director, Ferrovia Parts, Porto
“Peak week we ran six cells across three shifts at 1,190 picks an hour. The only incident report was about the coffee machine.”
VP Fulfilment, Lumio Grocers, Utrecht
Chapter 05 · Return
The arithmetic, done for you.
Move the sliders to your site. The model is simple on purpose, and the site survey makes it exact.
Estimated, per year
- Picks handled
- 15.30 M
- Hours redeployed
- 34,000
- Net saving
- €954,400
- Upfront cost
- €0
An estimate, not a quote. Your site survey replaces these assumptions with your own order profile.
Book a demo
Bring your worst SKU.
Send us a box of the items your pickers dread. We will run them on a production cell in Munich, live or on video, and send you the pick log afterwards.
- Test hall
- Hallstattweg 14, 80939 Munich
- Response
- Within one working day
- Sales
- +00 89 5550 1200
Questions
Asked on most site visits.
What can the K-1 not pick?
Items under 12 mm or over 310 mm on their longest side, anything above 8 kg, and loose liquids. Highly reflective, fully transparent items are picked at a reduced rate of around 800 an hour while Sight learns them. We will tell you during the site survey which share of your catalogue falls outside the envelope, usually under 4%.
Do I need to change my warehouse layout?
Rarely. The cell sits beside an existing conveyor or goods-to-person port and needs 2.1 m², a 16 A three-phase socket and a network drop. Most installations are done over a weekend without stopping the line.
How long until it picks new SKUs?
Most new items are picked correctly on first sight. Unusual ones are flagged in the console, the cell takes a few deliberate attempts, and the result is shared with every Kinemat cell on your account within the hour.
What does the subscription include?
The cell, Kinemat Fleet and Sight software, finger and suction-cup consumables, remote monitoring and on-site service within one working day in Germany, Austria, Switzerland and the Benelux. There is a 24-month minimum, then it runs monthly.
Who operates it day to day?
Whoever operates your line today. Training takes half a shift. Clearing a fault means reading the console, doing what it says and pressing resume. Your maintenance team gets a separate one-day course.
Where is it built?
Arms are assembled and every cell is run for 72 hours at our plant in Munich-Freimann before it ships. Gearboxes and sensors come from suppliers within 600 km.