Skip to content
Concept demo

A fictional brand, designed and built by Get Ranked On Top. Not a real company.

Step 00Bespoke staircase joinery · Riga · since 2009

Stairs drawn to the millimetre, built to outlast the house.

We measure your opening, draw every riser and tread, then cut, joint and fit the stair ourselves from Latvian birch and oak. One workshop on the left bank of the Daugava, one team from first sketch to last coat of oil.

35.4°15 × 186 mm2,790 mm262 mmLower floorUpper floor
stairs drawn, built and fitted
640
our cutting tolerance on every tread
±0.5 mm
years of guarantee on every glued joint
25
average from 212 client reviews
4.9

Step 01Four ways up

Pick the climb first. We'll draw the rest around it.

Every Risewell stair starts from the same three numbers: how high you need to go, how much floor you can give up, and how the stair should feel underfoot. The shape follows from those.

  • Straight flight

    One honest run from floor to floor. The easiest stair to climb and to carry furniture up, and the one that shows off a single long stringer of solid birch.

    Needs about 3.5 m of floor

    from €4,9007 weeks in the workshop
  • Quarter-turn winder

    Three tapered treads take the corner, so a stair that would need a landing fits against two walls. We set out the walking line so every step feels the same.

    Fits in about 2.5 × 1.5 m

    from €7,4009 weeks in the workshop
  • Spiral

    Treads fanned around a laminated birch column, for lofts, galleries and the attic you never use because the ladder is a nuisance. Every turn keeps two metres of headroom.

    From 1.3 m across

    from €8,90011 weeks in the workshop
  • Floating cantilever

    Solid treads anchored into a masonry or steel-reinforced wall, with nothing underneath but light. Our most demanding drawing and our most asked-about stair.

    Needs a structural wall

    from €11,80012 weeks in the workshop

Size yours in the calculator

Step 02The calculator

Enter two numbers. Get a stair you can climb.

Floor-to-floor height and the run you can spare are all we need to work out risers, rise and going, and to check the pitch against the limits we design every domestic stair to. Change the type and the drawing redraws itself.

Stair type
Your opening
2,790mm
3,680mm
900mm
Risers

15Best fit is 15

Timber and balustrade

Timber

Balustrade

Side profileComfortable and within the limits
Lower floor35.3°262.9 mm1862,790 mmUpper floorPlan
Risers
15
Treads
14
Rise
186 mm
Going
262.9 mm
Pitch
35.3°
2R + G
635 mm
Walking line
3,680 mm
Stair width
900 mm

Checked against domestic-stair limits

  • RiseBetween 150 and 190 mmPass
  • GoingAt least 250 mmPass
  • Stride (2R + G)In the 600–650 mm comfort bandPass
  • PitchNo steeper than 42°Pass
  • Flight16 risers or fewer in one flightPass

Estimate

€6,150 – €7,500

  • 7 weeks from drawing to fitting
  • 4.5 m of balustrade

Drawn, made, fitted and oiled in Riga, VAT included. The final price follows a free site measure.

Book a free site measure

Concept demo: nothing you type here is sent or stored.

Step 03Timber and finish

Birch from Vidzeme, oak from the Baltic, oil from our own bench.

Nine in ten of our treads come from forests within a day's drive of the workshop. We buy boards, not panels, and season them in the workshop for six weeks before the first cut.

  • Vidzeme

    Latvian birch

    Pale, close-grained and quietly tough. Our signature, and the timber we laminate our spiral columns from.

    Hardness
    5,500 N
    Price
    Our base price
  • Latgale

    Ash

    Lively grain with a slight spring to it. Takes a white oil beautifully for a Nordic, chalky finish.

    Hardness
    6,000 N
    Price
    +18% on birch
  • Kurzeme and Lithuania

    White oak

    The classic. Dense, stable and forgiving of boots, dogs and decades of daily climbing.

    Hardness
    6,000 N
    Price
    +32% on birch
  • Kurzeme

    Smoked oak

    Oak darkened right through in an ammonia chamber, so a chipped nosing stays the same colour as the rest.

    Hardness
    6,000 N
    Price
    +50% on birch

Three finishes

  1. Hard-wax oil

    Matt, warm and repairable in an afternoon. Our default.

  2. White oil

    Keeps birch and ash pale instead of ambering over the years.

  3. Water-based lacquer

    For stairs that see wet boots and a lot of traffic.

Step 04How a stair is made

Five steps, climbed in order.

Most stairs leave the workshop around five weeks after we first stand in your hallway with a laser and a notebook.

  1. Site measure

    We laser the opening, the floor levels and the walls, which are never as square as the plans say.

    1 working day

  2. Drawing

    Plan, section and every tread to scale. You sign off a drawing, not a mood board.

    6 working days

  3. Workshop

    Stringers routed, treads cut and jointed, every part numbered to the drawing.

    18 working days

  4. Dry-fit

    The whole stair is assembled in the workshop, checked with a level and taken apart again.

    2 working days

  5. Fitting and oil

    Two of us install it in one or two days, oil it, and leave the hallway cleaner than we found it.

    2 working days

Step 05Selected work

Four recent climbs.

Every project gets a drawing number and keeps it. These are four from the last two years.

  • Spiral

    Mežaparks villa

    A smoked-oak spiral rising through a 1930s villa's stairwell, its column laminated from 21 layers of birch.

    Floor to floor
    3,150 mm
    Risers
    17
    Timber
    Smoked oak
    Fitted
    2025

    It's the first thing anyone touches when they come in.

    Elīna V., owner

  • Straight flight

    Kalnciema loft

    A single birch flight under a skylight, with steel rods so thin the stair looks drawn in pencil.

    Floor to floor
    2,790 mm
    Risers
    15
    Timber
    Latvian birch
    Fitted
    2025

    They moved the stair 40 mm on the drawing so the skylight lines up. Nobody else would have noticed.

    Roberts K., architect

  • Quarter-turn winder

    Āgenskalns townhouse

    A quarter-turn oak winder squeezed into a wooden townhouse where the old stair was more ladder than stair.

    Floor to floor
    2,860 mm
    Risers
    16
    Timber
    White oak
    Fitted
    2024

    Our children run up it. They never ran up the old one.

    Sanita and Jānis P.

  • Floating cantilever

    Jūrmala dune house

    Floating ash treads cantilevered from a concrete wall, oiled white so they read like driftwood.

    Floor to floor
    2,700 mm
    Risers
    15
    Timber
    Ash
    Fitted
    2024

    Five weeks from the measure to standing on it.

    Marta L., owner

Step 06Proof

Climbed every day, recommended every week.

4.9 out of 5 from 212 reviews

  • The drawing showed exactly what we got, down to the screw caps on the rail.

    Kristaps D., Teika

  • They told us honestly that a spiral would not work in our space and drew us a winder instead.

    Ieva and Mārcis R., Sigulda

  • Fitted in a day and a half, oiled, swept. The dog approves too.

    Anna S., Cēsis

  • Joint guarantee

    25 years on every glued and wedged joint, transferable if you sell the house.

  • Millimetre tolerance

    Treads are cut to ±0.5 mm, so the last step is as tall as the first.

  • Local timber

    92% of our timber is grown in Latvia and sawn within 200 km of Riga.

  • Makers fit it

    The people who built your stair are the ones who install it. No subcontractors.

Size your stair

Step 07The studio

Eleven people, one long bench, and a drawing office upstairs.

Risewell began in 2009 in a rented garage in Pārdaugava with one router, one van and a stubborn belief that a stair is the most-used piece of furniture in a house.

Today we draw, cut and fit around fifty stairs a year from a former sawmill shed by the river. Every stair is drawn by the person who will build it.

  • Inga Bērziņa

    Founder and master joiner

    Has climbed every stair we have made, usually twice, usually with a level.

  • Mārtiņš Kalniņš

    Head of drawing

    Turns crooked walls into straight lines. Trained as an architect, defected to timber.

  • Dace Liepa

    Workshop lead

    Runs the bench, the spray booth and the six-week seasoning schedule.

Step 08Visit the workshop

Climb a few of our stairs before you choose yours.

Our showroom is the workshop itself: three finished stairs to walk up and down, timber samples to take home, and coffee while we sketch your opening.

Zāģeru iela 7, Rīga, LV-1005

Workshop hours

Monday to Friday
08:00–17:00
Saturday
10:00–14:00
Sunday
Closed

Talk to the drawing office

Free parking in the yard. Tram 2 to Zaķusala stop, then a four-minute walk.

Old TownDaugavaWorkshop

Step 09Questions

Asked on almost every site measure.

How much floor space does a stair really need?

For a 2.8 m floor-to-floor height, a straight stair needs about 3.5 m of run, a quarter-turn winder about 2.5 by 1.5 m, and a spiral as little as 1.3 m across. The calculator above gives you a first answer; the site measure gives you the real one.

Do you replace stairs in old wooden houses?

Often. Pre-war Riga houses rarely have level floors or square walls, so we scribe every tread to the wall and build the new stair to the house you have, not the one on the plans.

What limits do you design to?

Every domestic stair we draw keeps the rise between 150 and 190 mm, the going at 250 mm or more (220 mm on the walking line of a spiral), a stride (2R + G) between 600 and 650 mm, and a pitch no steeper than 42°. Your architect or building board may add their own requirements; we work to the stricter of the two.

How long does it take?

Usually seven to twelve weeks from the site measure to the fitted stair, depending on the type and the timber. Fitting itself takes one or two days.

Can the stair go in before the floors are finished?

Yes, and it often should. We fit a protected stair early, wrap the treads, and come back to oil it after the floors are done at no extra cost.

Do you work outside Riga?

Across Latvia, and in Estonia and Lithuania for larger projects. Site measures within 100 km of Riga are free.

Step 10Upper floor

Your stair starts with one measurement.

Try your numbers in the calculator, then book a free site measure. We'll bring the laser, the timber samples and a sharp pencil.

Risewell

Bespoke staircase joinery, drawn and built in Riga since 2009.

Zāģeru iela 7, Rīga, LV-1005
+371 6711 4820

© 2026 Risewell. All drawings are our own.

Risewell is a fictional brand: this is a concept demo. The people, projects, prices and reviews are invented, and nothing you enter is sent.

Back to the top
Get an estimatefrom €4,900