Ondel M2
Two-way, fully active, DSP-crossed. The speaker this page is about.
- Response42 Hz – 20 kHz ±1.5 dB
- THD @ 90 dB0.03%
- Power2 × 100 W / cabinet
A fictional brand, designed and built by Get Ranked On Top. Not a real company.
NEW Active bookshelf monitor, designed in Shenzhen
0.03% THD. Measured, not claimed.
From $1,290 / ¥8,990 per pair · ships March
Independently measured by
Signal & NoiseTHE LISTENING ROOMHertz Quarterlyaudio/ledgerLow End ReviewTeardown · Ondel M2
Five sub-assemblies, 142 parts, one engineering goal: get out of the way of the recording. Here is what sits behind the grille.
Teardown
Every M2 is assembled from five sub-assemblies that are measured on their own before they are measured together. Scroll to take one apart.
Layer 01
0.8 mm aluminium, CNC-perforated with 4,212 holes for 58% open area. Swept on every unit: its insertion loss stays under 0.2 dB to 20 kHz.
Layer 02
A 28 mm aluminium-magnesium dome in a shallow elliptical waveguide. First breakup sits at 31.4 kHz, an octave and a half above anything you can hear.
Layer 03
130 mm woven basalt-fibre cone on a cast basket, with a copper-capped pole piece that keeps inductance flat across ±8 mm of linear excursion.
Layer 04
A 4th-order Linkwitz–Riley crossover at 2.1 kHz, computed in 64-bit DSP, driving two 100 W Class D channels per cabinet. No passive parts in the signal path.
Layer 05
18 mm HDF with a constrained-layer damping sheet and three internal braces. The rear port is flared at both ends and tuned to 46 Hz.
Frequency response
The M2 ships tuned to the anechoic reference. Three onboard voicings change the shelf filters in DSP, not the drivers. Toggle them and hear the difference.
FLAT Anechoic reference. ±1.5 dB from 42 Hz to 20 kHz, as shipped. The sweep runs 40 Hz to 16 kHz in 3.2 s through the same filters. Mind your volume.
Built in Shenzhen
Our Longhua facility runs 14,000 m² of driver, cabinet and test lines under one roof, 26 minutes from the component suppliers we have worked with for a decade.
Voice coils wound in-house on Line 2, gap-gauged, then aged for 48 hours at rated power.
HDF panels CNC-cut to ±0.05 mm, bonded with constrained-layer damping, braced and cured.
Every unit is measured in our 6 × 6 × 4 m chamber and compared against the golden reference.
Matched pairs ship with a printed response trace signed off by the line engineer.
Laser-gauged on every motor before the cone is glued. Industry norm is around ±50 µm.
Each tweeter dome is profiled at 64 points. Outliers are recycled, not binned down.
Left and right cabinets are matched to within 0.25 dB from 100 Hz to 10 kHz.
Sweeps, distortion, impedance and polarity, logged against the unit's serial number.
Lineup
Each one is tuned against the same reference curve, so they work as one system or perfectly on their own.
Two-way, fully active, DSP-crossed. The speaker this page is about.
50 mm planar-magnetic drivers in a 318 g aluminium frame. Tuned against the M2.
An 8-inch long-throw driver in a 26 L sealed box, with room correction built in.
Compare
| Specification | M2 | H1 | Sub 8 |
|---|---|---|---|
| Type | 2-way active monitor | Open-back planar headphone | Sealed subwoofer |
| Drivers | 28 mm Al-Mg + 130 mm basalt | 50 mm planar magnetic | 8″ long-throw, 12 mm Xmax |
| Frequency response | 42 Hz – 20 kHz ±1.5 dB | 8 Hz – 48 kHz | 22 Hz – 160 Hz |
| THD | 0.03% @ 90 dB / 1 m | 0.05% @ 100 dB | 0.8% @ 40 Hz, 100 dB |
| Amplification | 2 × 100 W Class D | Not applicable | 300 W Class D |
| Inputs | USB-C 24/192, optical, RCA, XLR | 4.4 mm balanced, 3.5 mm | RCA, wireless link |
| Room correction | Yes, 8-band | Not applicable | Yes, 4-band |
| Weight | 6.1 kg each | 318 g | 14.2 kg |
| Price (USD / CNY) | $1,290 / ¥8,990 pair | $549 / ¥3,799 | $899 / ¥6,290 |
Reviews
“We put the M2 on our own bench expecting a marketing number. We measured 0.031% THD at 90 dB. In twelve years of testing, that is the first time a spec sheet was more modest than the product.”
“Imaging so precise you can point at the second violins. The Warm preset is the one I left on.”
“The certificate in the box matched our measurement within half a decibel. That never happens.”
“A small box that behaves like it doesn’t know it’s small. Down to 42 Hz, honestly.”
“Ondel has done the boring things perfectly — tolerances, matching, firmware — and that is exactly why it sounds exciting.”
Reserve · first batch
No payment today. We confirm your position, then charge only when your matched pair leaves the measurement lab.
FAQ
First production batch leaves Shenzhen in the week of 9 March. Reservations are filled strictly in order; your confirmation email carries your position in the queue.
The measured on-axis response of your exact cabinets from 20 Hz to 20 kHz, THD at three levels, the pair-matching delta and the name of the line engineer who signed it off. The same data is available by serial number in the Ondel app.
No. Each M2 cabinet contains its own DSP, two 100 W amplifier channels and a 24-bit / 192 kHz DAC. Connect a source over USB-C, optical, RCA or XLR, or stream over the wireless link.
Yes. The Sub 8 links wirelessly, and the M2 reconfigures its high-pass and phase automatically when one is detected. Firmware handles the crossover; no cables between speakers.
Five years on the drivers and cabinets, three years on the electronics, in every region we ship to. Repairs are done at our service centres, never by swapping your matched pair.
We currently ship to 31 countries across Asia-Pacific, Europe and North America. Prices are shown inclusive of local taxes at checkout; duties are paid by us.