Custom surfboards · Lima · since 2009
Every board starts as a line on the wall.
Five templates hang in our Barranco bay, pencilled from seventeen years of Pacific swell. Tell us your weight and your waves, and Rosa Olavera shapes a board around them by hand: outline, rocker, rails, fins.
- Shaped by hand in Barranco
- Ready in three to five weeks
- 30% deposit, rest on pickup
- boards shaped since 2009
- 3,412
- hours on the stand, per board
- 7.5
- of riders come back for the next one
- 64%
- years of templates on the wall
- 17
- Punta Hermosa · 1.6 m · SW · 14 s
- Señoritas · 1.2 m · S · 13 s
- Pico Alto · 3.4 m · SW · 17 s
- La Herradura · 1.8 m · W · 15 s
- Makaha · 0.9 m · SW · 12 s
- Punta Rocas · 2.1 m · S · 16 s
- San Bartolo · 1.1 m · SW · 12 s
- Chicama · 1.4 m · NW · 18 s
01 · The templates
Five templates hang on the bay wall.
Every Olavera starts from one of these outlines, cut in hardboard and tuned over thousands of sessions. We stretch, narrow and thicken them for you; the soul of the curve stays.
- 29.9 L
Performance shortboard
Garúa
6′0″ × 19¼″ × 2⁷⁄₁₆″
Named for Lima's winter drizzle: quiet, grey, relentless. Low entry, a hip in the squash and a nose that fits the pocket at Punta Rocas.
Best in: chest to overhead, open faces
from S/ 1,980Build from this one - 34.4 L
Twin-fin fish
Pejerrey
5′8″ × 21″ × 2⁹⁄₁₆″
Wide, flat and fast down the line, like the silverside it's named after. The board for Makaha's soft summer days and anyone who wants to fly.
Best in: knee to head high, soft walls
from S/ 1,890Build from this one - 50.3 L
Midlength
Malecón
7′4″ × 21½″ × 2¹³⁄₁₆″
The everyday glide for the cliff-path crowd. Easy paddling, a forgiving round tail and enough length to trim the long lefts at La Herradura.
Best in: waist to overhead, long walls
from S/ 2,280Build from this one - 43.4 L
Step-up and gun
Humboldt
7′2″ × 19¾″ × 2⅞″
For the days the Humboldt swell wakes Pico Alto. Pulled-in pin, staged rocker and the length to get in early, sized from 6′6″ to 9′2″.
Best in: double overhead and up
from S/ 2,640Build from this one - 76 L
Single-fin longboard
Totora
9′4″ × 23″ × 3″
A nod to the reed boats fishermen still ride at Huanchaco. Rolled vee, a broad nose for walking and a single fin that pivots like a dance step.
Best in: ankle to chest, clean lines
from S/ 2,890Build from this one
02 · The board builder
Tell us who's riding. Then move the lines.
Start with your weight, how you surf and where. We'll suggest a volume and a template; then stretch, narrow and swap tails and fins while the outline and rocker redraw, exactly as Rosa sketches them for you in the bay.
Inside your range. This is your board.
Your order slip
No. OLV-2614- Malecón templateS/ 2,280
- Round tailincluded
- 2+1 fin plugsS/ 80
- Standard glassingincluded
- Clear resin tintincluded
03 · On the bay
From blank to wax in six stations.
One shaper, one glasser, one sander, one board at a time. You can watch every step through the window on Pasaje Los Tumbos, or ask for photos as we go.
- 01
Fitting
Twenty minutes on the bench: your weight, stance, home break and the board you're riding now. We trace its outline over the template.
1 day - 02
Template
Rosa slides the hardboard template along the blank, pencils the new outline and cuts it with a handsaw, a few millimetres proud.
1 day - 03
Planer and rails
Rocker and foil come off the blank with a hand planer, then the rails are rolled under the side lights, which show every flat spot.
2 days - 04
Glassing
Iván lays the cloth and resin in the glass room: tint first, then laps, then a hot coat. Fin plugs set while the resin is still green.
4 days - 05
Sanding
Lucía sands to 400 grit, rinses and checks each rail by hand. A gloss coat goes on if you asked for one.
3 days - 06
Handover
Your name on the stringer, a coat of wax and a word on how to ride it. Bring your old board; we'll find it a new owner.
1 day
04 · Home breaks
Shaped for the waves outside the door.
The workshop sits on the cliffs above the Costa Verde. Each template was tuned on one of these breaks, and we still test every new board in them before it leaves.
- 1
Makaha
Lima's classroom: gentle peeling rights off the stony beach in Miraflores. Longboards and smiles.
- 2
La Herradura
A long, punchy left that wraps around the point in Chorrillos. Needs a south swell and a board that holds.
- 3
Señoritas
Two reefs side by side in Punta Hermosa: playful in summer, powerful in winter.
- 4
Pico Alto
The big-wave reef. Wakes up a few times a year and asks for every inch of a gun.
- 5
Punta Rocas
Consistent rights and lefts and the contest site, an hour south. Our test track.
05 · Riders
Boards that come back for more.
I brought her my old board in pieces and a list of complaints. The Garúa she shaped me turns twice as fast and still paddles into the bigger sets.
Daniela CcoriPunta Rocas, regular foot My first custom. We spent half an hour just talking about my stance. It's the first board I don't fight on the way out.
Joaquín RetesMakaha, two years surfing Third Humboldt from the same template. When Pico Alto breaks, that's the board I trust to take the drop.
Martín HuarcayaPico Alto, big-wave regular
Shaped by hand
No machine cuts. Every outline is drawn and planed in the bay.
Ride it 30 days
If it doesn't work, we reshape or credit the deposit to a new one.
Dings for life
Small dings on our boards are repaired at half price, forever.
Your name on it
Signed on the stringer by the shaper who made it.
06 · Ding repair
Broken boards come back here too.
We fix any board, ours or not. Drop it at the bay before 11:00 and we'll quote you the same day.
Olavera boards: small dings at half price for life.
| Repair | Price | Turnaround |
|---|---|---|
| Small ding, deck or bottom | from S/ 90 | 3 working days |
| Rail ding or crushed edge | from S/ 160 | 4 working days |
| Fin plug replacement, each | S/ 120 | 3 working days |
| Delamination patch | from S/ 260 | 6 working days |
| Snapped board, rejoined | from S/ 480 | 10 working days |
| Full sand and re-gloss | S/ 350 | 7 working days |
07 · The crew
Three people, one bay.
Rosa Olavera
Shaper, founder
Shaped her first board in her father's garage in Chorrillos at nineteen. Every template on the wall is hers.
Iván Quispe
Glasser
Fifteen years in resin. Mixes his tints by eye and lays a pin-line straighter than tape.
Lucía Tafur
Sander and finish
Rides a Totora at Makaha most mornings. Nothing leaves the bay until her hands say yes.
08 · Visit the bay
Come and see your board take shape.
The bay is a short walk from the Puente de los Suspiros. Fittings are by appointment; repairs and coffee are walk-in.
Address
Olavera SurfboardsPasaje Los Tumbos 27
Barranco, Lima 15063
Opening hours
- Monday–Friday: 09:00–18:00
- Saturday: 08:00–13:00
- Sunday: in the water
09 · Questions
Before you order.
How long does a custom board take?
Three to five weeks from your fitting. Epoxy, resin tints and boards over 8′4″ add about a week each, and the builder shows the date before you pay.
What volume should I ride?
The builder gives you a range from your weight, ability and waves. At your fitting we check it against the board you ride now; most riders land within a litre of the suggestion.
Can I change the design after paying the deposit?
Yes, until the blank is cut. After that we can still change fins, tint and glassing.
Do you ship outside Lima?
We ship across Peru in a padded board bag, two to four days by road. Outside Peru, ask us: we've sent boards to Chile, Ecuador and Spain.
Is the deposit refundable?
Fully, until the blank is cut. After that we keep it towards a reshape or a different board.
Your template is already on the wall.
Ten minutes in the builder, a fitting in the bay, and a board with your name on the stringer in about a month.
Build your board